学长别C我了我🔞在写作业🚩 News-Xiamen Jingwei Machinery & Fabrication Co., Ltd._Lathe_machined parts

jingwei

jingwei

News

CNC engraving and milling machine can also be called engraving machine.

2021

12-01

What is the working principle of the engraving machine?

The engraving machine consists of three parts: the computer, the engraving machine controller, and the engraving machine host. Working principle: The design and typesetting are carried out through the special engraving software configured in the computer, and the information of design and typesetting is automatically transmitted to the engraving machine controller by the computer, and then the controller converts the information into driving stepper motor or The power signal (pulse train) of the servo motor controls the engraving machine host to generate the X, Y, Z axis of the engraving tool path base path.

12-01

Maintenance and maintenance of CNC lathes

CNC lathe is a high-precision, high-efficiency automatic machine tool. Equipped with a multi-station turret or a power turret, the machine tool has a wide range of processing performance, which can process linear cylinders, oblique cylinders, arcs and various threads, grooves, worms and other complex workpieces, with linear interpolation, arc Interpolate various compensation functions, and play a good economical effect in the mass production of complex parts. The maintenance of CNC lathe with inclined bed is as follows:

2021

12-01

Application of frequency converter

When the CNC lathe is started, the current of the motor will be 5-6 times higher than the rated value, which will not only affect the service life of the motor but also consume more power. The system will have a certain margin in the selection of the motor during the design. The speed of the motor is fixed, but in actual use, sometimes it runs at a lower or higher speed, so it is very necessary to carry out frequency conversion transformation. The inverter can realize the soft start of the motor, achieve the purpose of energy saving and speed regulation by changing the input voltage and frequency of the equipment, and can provide the equipment with protection functions such as overcurrent, overvoltage and overload.

2021

12-01

Tool selection method

Installation method of CNC lathe

The lifting and positioning of the machine tool should use the special lifting tools provided by the manufacturer, and other methods are not allowed. No special hoisting tools are required, and steel wire ropes should be used to hoist and position according to the specified parts of the manual.

12-01

The basic composition of CNC lathe

2021

12-01

Features of CNC lathes

2021

12-01

Comparison of characteristics of ordinary gantry milling machine and CNC gantry milling machine

2021

12-01

2021

12-01

< go to Page

Jingwei Machinery

It has a manufacturing and processing base of more than 10,000 square meters, equipped with large-scale gantry machining centers, gantry grinders, vertical machining centers, high-speed CNC lathes, precision surface grinders, internal and external cylindrical grinders, and more than 60 sets of precision machining equipment of various sizes

Jingwei Machinery

Xiamen Jingwei Machinery & Fabrication Co., Ltd.

--------------

Contact: Miss Wu, Miss Chen

Tel：+86-592-5711236 18950019755

Mail：[email protected]

Abb：No. 74, Xikezhen South 2nd Road, Tong'an District, Xiamen City

›

·^{^›}
•·

•

·^›

^·